Showing 1–12 of 19 results

GPON SFP, 2.5G/1.25G, 1490/1310, 20KM, C+

Parameter Symbol Min. Max Unit Storage Temperature TSTG - -40 85 °C Operating Case Temperature TC 0 70 °C Power Supply Voltage VCC 3.1 3.5 V Total Power Supply Current Icc - 500 mA Recommended Operating Conditions: Parameter Symbol Min. Typ. Max. Units Notes Optical Transmitter Power P0 +3 - +7 dBm Optical Transmitter Power off POFF - - -39 dBm Optical Transmitter Power off POFF - - -39 dBm Output Center Wavelength Λ 1480 - 1500 nm Output Spectrum Width ∆λ - - 1.0 nm Side Mode Suppression Ratio SMSR 30 - - dB 1 Extinction Ratio ER 8.2 - - dB Optical Rise Time 160 - - 160 ps Optical Fall Time - - - 160 ps Optical Eye Diagram Compliant with ITU-T G.984.2 Mask Tolerence to Tx Back Reflection - -15 - - db Data Rate - - 2.488 - Gb/s Differential Input Voltage VPP 300 - 1200 Mv Differential Input Impedance ZIN 80 100 120 ohm Tx_fault Output Voltage- High VIH 2.4 - - V Tx_fault Output Voltage- Low VIL - - 0.4 V Tx_Dis Input Voltage- High VIH 2.0 - - V Tx_Dis Input Voltage- Low VIL - - 0.8 V

Sopto 25G SFP

Soptos 25G SFP28 optical transceivers are designed for use in 25GBASE data rate over multimode or single model fiber. They are compliant to IEEE 802.3by, SFF-8472 Rev 12.2 and SFF-8402,and compatible with SFF-8432 and applicable portions of SFF-8431 Rev. 4.1. The optical transceiver is compliant per the RoHS Directive 2011/65/EU.

Syrotech SEP- GOXS-BI4312-20PON+++

Parameter Symbol Min. Max Unit Storage Temperature TSTG - -40 85 °C Operating Case Temperature TC 0 70 °C Power Supply Voltage VCC 3.1 3.5 V Total Power Supply Current Icc - 500 mA Recommended Operating Conditions: Parameter Symbol Min. Typ. Max. Units Notes Optical Transmitter Power P0 +3 - +7 dBm Optical Transmitter Power off POFF - - -39 dBm Optical Transmitter Power off POFF - - -39 dBm Output Center Wavelength Λ 1480 - 1500 nm Output Spectrum Width ∆λ - - 1.0 nm Side Mode Suppression Ratio SMSR 30 - - dB 1 Extinction Ratio ER 8.2 - - dB Optical Rise Time 160 - - 160 ps Optical Fall Time - - - 160 ps Optical Eye Diagram Compliant with ITU-T G.984.2 Mask Tolerence to Tx Back Reflection - -15 - - db Data Rate - - 2.488 - Gb/s Differential Input Voltage VPP 300 - 1200 Mv Differential Input Impedance ZIN 80 100 120 ohm Tx_fault Output Voltage- High VIH 2.4 - - V Tx_fault Output Voltage- Low VIL - - 0.4 V Tx_Dis Input Voltage- High VIH 2.0 - - V Tx_Dis Input Voltage- Low VIL - - 0.8 V

Yxfiber 100G SFP

The QSFP28-100G-SR4 is a transceiver module designed for 100m optical communication applications. The design is compliant to 100GbASE-SR4 of the

Yxfiber 10G SFP

•Supports 9.95 to 10.3Gb/s bit rates •Simplex LC Connector •Hot pluggable SFP+ footprint •Uncooled 1270nm DFB transmitter, 1330nm PIN photo-detector

Yxfiber 40G SFP

•Supports 1.06 to 10.5Gb/s bit rates per Channel •Four-Channel ,1×12 MPO receptacle •Hot pluggable QSFP+ form factor •VCSEL 850nm array

YXFiber-GPON SFP, 2.5G/1.25G, 1490/1310, 20KM, C++

Interface LC Duplex Tx Power -9.5 ~ -3dBm Max Data Rate 1.25g Dom Support Yes Receiver Sensitivity < -23dBm Max Cable Distance 20km Trademark YXFiber Transport Package 10PCS/PVC 100PCS/Carton Specification 0.03KG Origin Wuhan